Optimate 4 DUAL Program
SKU:
$83.49
$75.89
$75.89
per item
The most ADVANCED & TRUSTED battery charger in power sports!
SKU: TM-341
OptiMate 4 Dual Program includes two charging programs; program 1 is for direct charging of a battery, program 2 allows safe and unsupervised charging through a BMW motorcycle’s CAN-bus controlled 12V socket. OptiMate 4 Dual Program tests before & after charging and can recover a ‘dead-flat’ battery from as low as 0.5 Volts.
CHARGING AMPS : 1A (constant current)
USE : Indoor / Outdoor (lowest temperature: -40°F / -40°C).
SAVE : Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode).
IDEAL FOR : STD, AGM & GEL 12V batteries from 3 – 50Ah.
INPUT : Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.
STYLE : Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.
INCLUDED : Weatherproof battery lead & standard battery clip set included.
SKU: TM-341
OptiMate 4 Dual Program includes two charging programs; program 1 is for direct charging of a battery, program 2 allows safe and unsupervised charging through a BMW motorcycle’s CAN-bus controlled 12V socket. OptiMate 4 Dual Program tests before & after charging and can recover a ‘dead-flat’ battery from as low as 0.5 Volts.
CHARGING AMPS : 1A (constant current)
USE : Indoor / Outdoor (lowest temperature: -40°F / -40°C).
SAVE : Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode).
IDEAL FOR : STD, AGM & GEL 12V batteries from 3 – 50Ah.
INPUT : Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.
STYLE : Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.
INCLUDED : Weatherproof battery lead & standard battery clip set included.
TECHNICAL SPECIFICATIONS
- Recommended for AGM/MF, Standard, GEL and spiral cell batteries - Recharging (48 hours): from 2Ah to 50Ah capacity. Long term maintenance: up to 75Ah
- Program control - microprocessor, 6 stages, fully automatic
- Input voltage - 100V – 240V @ 50 - 60Hz
- Input current max. - 0.095A @ 230V 0.27A @ 100V – 0.15A @ 240V
- Typical annual energy cost - ± $1 (continuous maintenance)
- Reverse drain current - less than 0.5mA
- Output current (bulk charge) - 0.8A
- Automatic desulfation - 2 stages (recovery and Turbo-recovery)
- Charge time limit - 48 hours (maintenance time: unlimited)
- Maintain / test cycles - 30 min/30 min (alternating hourly)
- Charge retention test - Range: 12.0 - 12.6V. GOOD (green) = battery voltage > 12.6V
- Size - 8 x 3 x 2 1/2 inches (200 x 75 x 61 mm)
- Weight (packaging) - 1 lbs (2 lbs) - 0.48 kg (0.9 kg)
- Enclosure classification - IP54
- Mounting - easy direct wall mounting
- Input cable length - 6 ft / 2 m
- Output cable length - 6 ft / 2 m
- Included Accessories - O-1 fused eyelet set, weather protected & O-4 clamps set for bench charging
- Operation temperature range - -40 °F to 104 °F / -40 °C to +40 °C
- Warranty - 3 years